Membrapure500

Water Purification Systems

Water Purification Systems

Membrapure-01

The NEW Ultrapure Water Systems provide you with reliable and compact systems to produce ASTM Type 1 grade water.

The NEW Ultrapure Water Systems provide you with reliable and compact systems to produce ASTM Type 1 grade water.

The Aquinity² is fed directly from municipal or potable tap water, whereas the Astacus² needs deionised water. Both systems ensure a high level of convenience at low operating costs.

Aquinity² systems are equipped with a reverse osmosis (RO) and/or an optional electro-deionisation (EDI) cell to produce deionised water. The systems feature 10L, 35L or 70L storage reservoirs which are filled at a production rate of 10L/hr.

The Aquinity² is fed directly from municipal or potable tap water, whereas the Astacus² needs deionised water. Both systems ensure a high level of convenience at low operating costs.

Aquinity² systems are equipped with a reverse osmosis (RO) and/or an optional electro-deionisation (EDI) cell to produce deionised water. The systems feature 10L, 35L or 70L storage reservoirs which are filled at a production rate of 10L/hr.

The deionised water can be dispensed straight from this reservoir. In the next step the ultrapure water is produced with an optimized combination of activated carbon and mixed bed cartridges.

As an additional option the new Aquinity² and Astacus² models enable remote diagnosis and service via the internet. This Remote Check offers you the opportunity to save time and money with fast and reliable support from our service team.

The deionised water can be dispensed straight from this reservoir. In the next step the ultrapure water is produced with an optimized combination of activated carbon and mixed bed cartridges.

As an additional option the new Aquinity² and Astacus² models enable remote diagnosis and service via the internet. This Remote Check offers you the opportunity to save time and money with fast and reliable support from our service team.

Advantages of the new systems

• Compact housing

• Big touchscreen

• Remote service module

 

• Menus and wizards easy to use and mistake avoiding

• New fixed and flexible dispenser

• Easy access for cartridge exchange

Aquinity² P10

Aquinity² P10

The Aquinity² P10 ultrapure water system is equipped with a reverse osmosis (RO) cell to produce deionised water directly into an integrated 10L tank.

Aquinity² models produce ultrapure water directly from municipal or potable tap water. In the next step Type I grade water is produced with a polisher cartridge.
The Aquinity² P10 model is ideal for laboratories with a limited daily need for ultrapure water.

  • Permeate rate: 8 L/hr
  • Resistivity: 18.2 MOhm x cm
  • Reservoir: 10 L
  • Flow Rate UPW: 1.5 L/min
  • TOC
    < 10 ppb (Reagent)
    < 3 ppb (Analytical with UV)

The Aquinity² P10 ultrapure water system is equipped with a reverse osmosis (RO) cell to produce deionised water directly into an integrated 10L tank.

Aquinity² models produce ultrapure water directly from municipal or potable tap water. In the next step Type I grade water is produced with a polisher cartridge.
The Aquinity² P10 model is ideal for laboratories with a limited daily need for ultrapure water.

  • Permeate rate: 8 L/hr
  • Resistivity: 18.2 MOhm x cm
  • Reservoir: 10 L
  • Flow Rate UPW: 1.5 L/min
  • TOC
    < 10 ppb (Reagent)
    < 3 ppb (Analytical with UV)

Aquinity² P35 / P70

Aquinity² P35 / P70

Aquinity² P35/P70 versions have an independent tank from which RO water can be tapped (e.g. for glassware cleaning).
The water quality from this tank depends on the feed water quality; in general the RO holds back 98% of all ions. The tank can be installed at the side or above the system or even underneath the bench.

Tapping of ultrapure water is done with our flexible but also lockable dispenser as incorporated in all membraPure ultrapure water systems. Built-in TOC monitoring is also available with the Aquinity² P35/P70 versions.

Aquinity² P35/P70 is the perfect system for a medium-sized lab.

  • Permeate rate: 10 L/hr
  • Resistivity: 18.2 MOhm x cm
  • Reservoir: 35 L or 70 L
  • Flow Rate UPW: 2 L/min
  • TOC
    < 10 ppb (Reagent)
    < 3 ppb (Analytical with UV)
    < 5 ppb (LifeScience with UV and UF)
  • Endotoxins: < 0.001 EU/ml endotoxins (LifeScience)

Aquinity² P35/P70 versions have an independent tank from which RO water can be tapped (e.g. for glassware cleaning).
The water quality from this tank depends on the feed water quality; in general the RO holds back 98% of all ions. The tank can be installed at the side or above the system or even underneath the bench.

Tapping of ultrapure water is done with our flexible but also lockable dispenser as incorporated in all membraPure ultrapure water systems. Built-in TOC monitoring is also available with the Aquinity² P35/P70 versions.

Aquinity² P35/P70 is the perfect system for a medium-sized lab.

  • Permeate rate: 10 L/hr
  • Resistivity: 18.2 MOhm x cm
  • Reservoir: 35 L or 70 L
  • Flow Rate UPW: 2 L/min
  • TOC
    < 10 ppb (Reagent)
    < 3 ppb (Analytical with UV)
    < 5 ppb (LifeScience with UV and UF)
  • Endotoxins: < 0.001 EU/ml endotoxins (LifeScience)

Aquinity² E35 / E70

Aquinity² E35 / E70

Aquinity² E35/E70 ultrapure water systems contain an electro deionization (EDI) cell to produce Type II water with a production rate of 10 L/hr.

The systems are equipped with 35 L or 70 L storage reservoirs. The water can be dispensed directly from the reservoir. In Aquinity² E35/E70 models the water from the reservoir has a very high quality of <0.1 μS/cm and can therefore be used for less sensitive applications.

Also this high water quality prevents the polisher cartridge to be exhausted quickly. So for all labs which use more than 100L/day the Aquinity² E35/E70 is also an economical and ecological (less waste) wise decision.

All Aquinity models are available in different versions (Reagent, Analytical & LifeScience)

  • Permeate rate: 10 L/hr
  • Resistivity: 18.2 MOhm x cm
  • Reservoir: 35 L or 70 L
  • Flow Rate UPW: 2 L/min
  • TOC
    < 10 ppb (Reagent)
    < 3 ppb (Analytical with UV)
    < 5 ppb (LifeScience with UV and UF)
  • Endotoxins: < 0.001 EU/ml endotoxins (LifeScience)

Aquinity² E35/E70 ultrapure water systems contain an electro deionization (EDI) cell to produce Type II water with a production rate of 10 L/hr.

The systems are equipped with 35 L or 70 L storage reservoirs. The water can be dispensed directly from the reservoir. In Aquinity² E35/E70 models the water from the reservoir has a very high quality of <0.1 μS/cm and can therefore be used for less sensitive applications.

Also this high water quality prevents the polisher cartridge to be exhausted quickly. So for all labs which use more than 100L/day the Aquinity² E35/E70 is also an economical and ecological (less waste) wise decision.

All Aquinity models are available in different versions (Reagent, Analytical & LifeScience)

  • Permeate rate: 10 L/hr
  • Resistivity: 18.2 MOhm x cm
  • Reservoir: 35 L or 70 L
  • Flow Rate UPW: 2 L/min
  • TOC
    < 10 ppb (Reagent)
    < 3 ppb (Analytical with UV)
    < 5 ppb (LifeScience with UV and UF)
  • Endotoxins: < 0.001 EU/ml endotoxins (LifeScience)

Astacus²

Astacus²

To produce ultra pure water Astacus² systems are fed with deionized water.

Astacus² models are designed for a daily consumption of less than 100 L and are equipped with a MemPak purification cartridge.

The Astacus² water purification system is available in different versions (Reagent, Analytical & LifeScience) to meet the specific requirements of ultra pure water for different applications.

The systems also have the new fixed and flexible dispenser and a big touchscreen with easy to use menus and wizards.

  • Resistivity 18.2MOhm x cm
  • Flow Rate UPW 2 L/min
  • TOC
    < 10 ppb (Reagent)
    < 3 ppb (Analytical with UV)
    < 5 ppb (LifeScience with UV and UF)
  • Endotoxins: < 0.001 EU/ml endotoxins (LifeScience)

To produce ultra pure water Astacus² systems are fed with deionized water.

Astacus² models are designed for a daily consumption of less than 100 L and are equipped with a MemPak purification cartridge.

The Astacus² water purification system is available in different versions (Reagent, Analytical & LifeScience) to meet the specific requirements of ultra pure water for different applications.

The systems also have the new fixed and flexible dispenser and a big touchscreen with easy to use menus and wizards.

  • Resistivity 18.2MOhm x cm
  • Flow Rate UPW 2 L/min
  • TOC
    < 10 ppb (Reagent)
    < 3 ppb (Analytical with UV)
    < 5 ppb (LifeScience with UV and UF)
  • Endotoxins: < 0.001 EU/ml endotoxins (LifeScience)

memTap - Automatic Dispensing

memTap - Automatic Dispensing

memtap300

The new automatic memTap allows the volumetric controlled tapping of water with a dispenser arm. The arm can be moved horizontally and vertically. Preset of tap-volume is in 0.1 L steps. This system prevents overflow of containers and allows to tap water without supervising. The 9cm display with touch screen offers you all relevant data at a glance.

The new automatic memTap allows the volumetric controlled tapping of water with a dispenser arm. The arm can be moved horizontally and vertically. Preset of tap-volume is in 0.1 L steps. This system prevents overflow of containers and allows to tap water without supervising. The 9cm display with touch screen offers you all relevant data at a glance.

AquaRO² & EDI² - Pure Water Systems

AquaRO² & EDI² - Pure Water Systems

The new pure water systems AquaRo² and EDI² provide you with reliable and compact systems which produce up to ASTM Type II grade water. Both systems ensure high comfort at low operating costs.

Both systems are equipped with a pretreatment of activated carbon and softening components. AquaRo² systems are equipped with a reverse osmosis (RO) and EDI² with an additional electro deionization (EDI) cell to produce de-ionized water of Type II. The systems are equipped with 10 L, 35 L, 70 L or an individual sized storage reservoir which are filled with a production rate of 5-40 L/hr. The de-ionized water can be dispensed with a fixed and flexible dispenser. As an additional option the new AquaRo² and EDI² models enable remote diagnosis and service via Internet. This Remote Check offers you the opportunity to save time and money by fast and reliable support through the service team.

The new pure water systems AquaRo² and EDI² provide you with reliable and compact systems which produce up to ASTM Type II grade water. Both systems ensure high comfort at low operating costs.

Both systems are equipped with a pretreatment of activated carbon and softening components. AquaRo² systems are equipped with a reverse osmosis (RO) and EDI² with an additional electro deionization (EDI) cell to produce de-ionized water of Type II. The systems are equipped with 10 L, 35 L, 70 L or an individual sized storage reservoir which are filled with a production rate of 5-40 L/hr. The de-ionized water can be dispensed with a fixed and flexible dispenser. As an additional option the new AquaRo² and EDI² models enable remote diagnosis and service via Internet. This Remote Check offers you the opportunity to save time and money by fast and reliable support through the service team.

About membraPure

About membraPure

Need more information / Questions?

Need more information / Questions?

Please contact us by phone or email:

Freephone 0800 724 633

info@scienze.nz

Or use the contact form below:

Please enter your name.
Please enter a message.

For Greater Productivity & Insights

For Greater Productivity & Insights

Copyright © 2020, Scienze. All rights reserved.