Digitor 22

Max. capacity: 4 x 750 ml.
Max. speed: 21.948 xg / 14,300 RPM

Benchtop centrifuge with large capacity and high perShapence. With a wide range of accessories to process tubes from 750 ml. to 0,2 ml. in more than 12 rotors, both angle fixed and swing out. It has more than 50 different sets of adaptors, giving it great versatility. This equipment is the culmination of the merger of high capacity and high speed equipment, resulting in a routine use centrifuge with some specifications characteristic of superior level models. Its colour TFT touch screen offers perShapence that permits, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation.

The autonomy provided by this equipment enables the user to optimise working time in the lab, by automation of cycles and modes of operation. These features also ensure process traceability and the assurance that no parameter is uncontrolled.

Features

TFT color touch screen, visible from more than 3 m.:

Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
Speed programming in 10 RPM/10 xg steps.
Real RCF values on screen based in accessories configuration.
Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
40 programmable memories, with protection under password.
Several acoustic and visual messages warning the user the device situation.

Easy to use

Microprocessor controlled. PC connection.
Induction motor maintenance free (brushless).
Rotors and adapters list on memory.
Noise level: below 60 dB.
Start, stop, open lid and short spin with adjustable speed buttons.
Option of free/locked adjustment of RPM/ RCF along the run.
Automatic open lid, programmable.
Low heigh for easy access.
Last values remain in memory.
Automatic rotor recognition. Over-speed protection.

Safety

Lid provided with security systems:
– Automatic lid lock system, motorized with double lock.
– Emergency lid-lock release.
– Locking and protection against opening along the run.
– Lid dropping protection.
– Port in the lid for calibration and operation checking.

Ergonomic design that allows close the lid effortless.
Unbalance detection and switch off.
Protection safety ring between the centrifugation chamber and the housing.
Chamber of centrifugation in stainless steel (easy cleaning).
Rotors can be removed with the lid closed. Hermetic lids.
Rotors and adapters autoclavable, easy to install by the user.
Forced ventilation to reduce temperature increasing.
Automatic disconnection for energy saving up to 8 h., with deactivation option.

Dimensions

Compatible rotors:

RT 277

Rotor: Swing out
Max. capacity: 4 x 750 ml.
RPM Max: 3700
Radio (mm): 204
RCF Max. (xg): 3.122

RT 278

Rotor: Swing out
Max. capacity: 4 x 250 ml.
RPM Max.: 4200
Radius (mm): 202
RCF Max. (xg): 3.984

RT 279

Rotor: Swing out
Max. capacity: 104 x 5 ml.
RPM Max.: 3800
Radius (mm): 185
RCF Max. (xg): 2.987

RT 280

Rotor: Angle fixed
Max. capacity: 8 x 50 ml.
RPM Max.: 6000
Radius (mm): 149
RCF Max. (xg): 5,997

RT 281

Rotor: Angle fixed 45º
Max. capacity: 4 x 100 ml.
RPM Max.: 5600
Radius (mm): 138
RCF Max. (xg): 4.838

RT 282

Rotor: Angle fixed 30º
Max. capacity: 4 x 250 ml.
RPM Max.: 4700
Radius (mm): 153
RCF Max. (xg): 3.779

RT 283

Rotor: Swing out
Max. capacity: 4 blood bags
RPM Max.: 3700
Radius (mm): 204
RCF Max. (xg): 3.122
*Only available for refrigerated models.

RT 284

Rotor: Swing out
Max. capacity: 12/8/4 microtiter
RPM Max.: 3700
Radius (mm): 182
RCF Max. (xg): 2.786

RT 287

Rotor: Angle fixed 45º
Max. capacity: 30 x 1,5-2 ml.
RPM Max.: 14300
Radius (mm): 96
RCF Max. (xg): 21.948

RT 292

Rotor: Angle fixed 30º
Max. capacity: 6 x 85 ml.
RPM Max.: 9000
Radius (mm): 112
RCF Max. (xg): 10.142

RT 299

Rotor: Swing out
Max. capacity: 6 x 250 ml.
RPM Max.: 2500
Radius (mm): 212
RCF Max. (xg): 1.481

RT 301

Rotor: Swing out
Max. capacity: 104 x 10 ml.
RPM Max.: 3800
Radius (mm): 185
RCF Max. (xg): 2.987

Download Digtor 22 Brochure ›

Centrifuges for standard and commonly used tubes...

Mini, Small & Micro

Mini: Minicen: for work with microtubes.

Small: Microcen 24: for general use in all kind of laboratories.

Microcentrifuges: Biocen 22, Biocen 22 R: High speed, centrifuge for microtubes and microhematocrit with application in Biotechnology, Nanotechnology…

Benchtop

Benchtop: Unicen 21, Digicen21, Digicen 21 R: versatility, applicable in most laboratories

High Capacity Benchtop

High capacity benchtop: Consul 22, Consul 22 R, Digtor 22, Digtor 22 R, Dilitcen 22: for water, food, beverage, oil and blood tests, biotechnology…